Home > Products > Industries Served >

PCB Design Manufacturing and Assemble for Quadrotor

PCB Design Manufacturing and Assemble for Quadrotor

PCB Design Manufacturing and Assemble for Quadrotor
PCB Design Manufacturing and Assemble for QuadrotorPCB Design Manufacturing and Assemble for Quadrotor
CategoriesIndustries Served
AlbumView larger image
Board Material :FR4
Layer4 Layer
Update Time2018-12-13
Detail Information

Recently, quadcopters are very popular in the market. Our factory has made a lot of shipments to Israeli. The customers’ feedback is very good. Orders in 2018 are expected to be 50,000 sets. We can provie one stop service for quadrotor, from PCB Design, PCB Manufacturing to PCB Assembly.

Quadrotor is also called helicopter. It is a multirotor helicopter that is lifted and propelled by four rotors. Quadcopters are classified as rotorcraft, as opposed to fixed-wing aircraft, because their lift is generated by a set of rotors.

Then come next. The rack is intended to be constructed with the existing electric tail pipe and pipe base and equipped with hard discs. The new 2212 KV930 motor is used for the motor. The two positive and negative propellers have good reputation in Germany EPP1045.

flight control board

The principle of the quadcopter is not complicated. Take four axes as an example, the four oars form a rotor plane, and the flight control board controls the output of each power group to control the tilt of the rotor plane, and the lift force is used for change the direction.

pcb manufacturing

The difficult of cost and producing is the control part for machine. The GPS IC is very expensive in market. If our quadcopter flies and moves by changing the RPM of each propeller. So when you move a stick on your controller, this command needs to be converted into the proper commands each of the four motors. The rack is finished. Next is the remote control's transformation time, bought a cheap and large FT06-C, ready to change the 6-pass to 8 pass, increase the two proportional channels, and coupled with the LCD screen for display control Related parameters. The controlled high-frequency head is still used, and the PPM code board replaces it entirely.In advanced quadcopter, the flight controller also has a transmitter to communicate with your controller, to provide two way communication. Typical sensors come with more complex quadcopters include GPS, gyro compass, and barometer.

Finally, we got the reasonable price and the best material to finish producing.

We have big advantage to control the cost for customer, if you have any question about this design, we will solve for you as soon as possible. Welcome to Contact us.

Payment Methods
contact us
  No.13-1 Youquan Road,
Zhanqian Street, Jinzhou District,
Dalian, China